[TAG] how to share internet from a linux server

[j.bakshi@icmail.net]

----- Original Message Follows -----
From: Kapil Hari Paranjape <kapil at imsc.res.in>
To: TAG <tag at lists.linuxgazette.net>
To: j.bakshi at icmail.net, The Answer Gang
<tag at lists.linuxgazette.net>
Subject: Re: [TAG] how to share internet from a linux server
Date: Fri, 12 Jan 2007 06:46:33 -0800

> Hello,
> 
> On Fri, 12 Jan 2007, j.bakshi at icmail.net wrote:
> > 3] I have a linksys RV042 load balancing router which
> > have 2 uplink port.
> >      I have configured one uplink with ip 192.168.0.114 
> >  and mask 255.255.255.0
> >      and connect this port with eth1
> 
> What is a load balancing router doing *inside* the LAN? I
> think you should be using a HUB/switch. Here is a little
> diagram
> 
>     -----[ eth0: Linux nat box : eth1]----[ Hub/switch
> ]---[LAN]
> 
> Is this not what you want? Perhaps I understood your
> question wrong.

OK here is the diagram of my setting

24online isp -------->[ eth0(used to dial isp) linux   eth1]
----->[ wan2 of load balancing router]-------->[hub]------->
clients PC


> 
> > Please suggest how can I solve the problem. pointing out
> > any tutorial is also welcome.
> 
> Have a look at the howtos on the iptables site.
> 
> Kapil.
> --
>